Great Plains 2420P Assembly Instructions - Manual

© Copyright 2002 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
120-299M
3-Point Precision Seeding System
Veris Drive Option
• 1510P and 1520P
• 2010P and 2020P
• 2410P and 2420P
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the Veris
Drive Option. The Veris Drive is a precision popu-
lation controller which uses a hydraulic drive to
accurately drive the metering system.
These instructions apply to:
120-296A Veris Drive (for no-till drills
hooked to a CPH or PFH and features longer hos-
es and cables)
120-297A Veris Drive (for mounted drills
hooked directly to the tractor’s 3PT hitch and fea-
tures shorter hoses and cables)
Manual Update
Refer to the 3-Point Precision Seeding System
operator’s manual for detailed information on
safely operating, adjusting, troubleshooting and
maintaining the Veris Drive. Refer to the parts
manual for part identification.
118-732M Operator’s Manual
118-732P Parts Manual
118-740M Operator’s Manual
118-740P Parts Manual
118-769M Operator’s Manual
118-769P Parts Manual
4/7/2003
Before You Start
Pages 7 and 8 are a detailed listing of parts in-
cluded in the Veris Drive Option package. Use this
list to inventory parts received.
Tools Required
• Basic Hand Tools
Definitions
Right-hand and left-hand as used in this manual
are determined by facing the direction the
machine will travel while in use unless otherwise
stated.