Great Plains 4000-3S Assembly Instructions - Manual (Page 3)

2/17/2005 195-252M
Great Plains Mfg., Inc.
3 Installation Instructions
Refer to Figure 4
4. Using a reducer fitting (7), assemble gauge
(8) on new pressure-control valve.
a. Assemble reducer fitting into top-rear
port.
b. Apply sealant to threads on gauge.
c. Thread gauge into reducer fitting until
gauge is tight and facing forward.
Refer to Figure 5
5. Mount the new pressure-control valve (9) on
the mounting bracket using 1/4" x 2 1/4" bolts
(10), flat washers, lock washers and nuts.
Place the new decals (11) under the pres-
sure-control valves.
Figure 4 17099
Figure 5
17086