Great Plains 1500TM Predelivery Manual - Manual (Page 16)

12 1200-1500TM Great Plains Manufacturing, Inc.
586-535Q 12/12/2013
Depth Stop & Angle Gauge
Refer to Figure 12
Note: See machine layout drawings in Appendix for
proper gang gauge placement for each model.
39. Slide depth stop tube from rear of machine under
left wing stop through square hole on depth control
bracket on center wing brace. Align rear holes over
lever on torque tube, secure with 1/2 x 3 hex bolt
,
1/2 top lock nut.
40. Fasten depth stop assembly on top of depth stop
tube with 1/2 x 2 1/2 hex bolts , 1/2 lock washers
and nuts.
41. Attach angle gauge bracket assembly to front of
center frame with 1/2 x 3 1/32 x 6 u-bolts , 1/2 lock
washers and 1/2 nuts.
42. Attach gauge link to ear on front of center frame
and gauge bracket assembly , secure with 3/8 x 1
1/4 hex bolts and 3/8 top lock nuts.
43. Bolt may be tightened to specs, See “Torque Values
Chart” on page 19.
1
2
3
4
5
6
7
5
8
Figure 12
Depth Stop & Angle Gauge 43125
U
D
F
B
L
R
8
5
6
4
3
1
2
7