Great Plains 1500TM Predelivery Manual - Manual (Page 17)

Great Plains Manufacturing, Inc. Assembly 13
12/12/2013 586-535Q
Lights & SMV
Refer to Figure 13
Note: See layout drawings in Appendix for proper light bracket
placement. The SMV sign will be shipped in a bag and
will need installed on the rear of the machine.
44. Remove u-bolts from light brackets and rotate 180
degrees. Re-install the LH and RH light brackets with
the 1/2 x 3 1/32 x 6 u-bolts , 1/2 lock washers and 1/2
nuts.
45. Attach the SMV sign to the rear of the smv bracket
with 1/4 x 3/4 pan head screws , 1/4 lock washers and
1/4 nuts.
46. Tighten all bolts to specs, See “Torque Values Chart” on
page 19.
2
1
3
4
6
5
Figure 13
Lights & SMV
42887
1 2
3
4 5
6