Great Plains 4000TM Predelivery Manual - Manual (Page 13)

Great Plains Manufacturing, Inc. Table of Contents Index Assembly 9
11/06/2012 Table of Contents Index 586-288Q
Valve Brackets & Hoses 1800-3000
Refer to Figure 8
Note: The hoses will be shipped hooked up to valves and cyl-
inders. The front valves and hoses (that will need rout-
ed through front brace bar, trusses and up hitch to
tractor) will be rolled up and tied to front of center frame
during shipping. The wing fold two way
, bypass
and lock valves will need mounted in proper location
as shown and hoses routed correctly before front truss-
es
and hitch are installed so front weight kits may be
installed or removed without taking hoses or valves
loose. The hoses need to route in locations shown with
arrows, on top of wing brace
to outside of tubes then
back to inside. Install front trusses on top of hoses as
shown. The two valve plates will be mounted in correct
location but will need turned around 180 degrees on
tube so they are facing forward on machine. Set them
1” from truss plates as shown. See “Valve Brackets &
Valves 1800-3000” on page 10 for proper mounting in-
structions.
Valve Brackets & Hoses 3500-4000
Refer to Figure 9
Note: The hoses will be shipped hooked up to valves and cyl-
inders. The front valves and hoses (that will need rout-
ed through front brace bar, trusses and up hitch to
tractor) will be rolled up and tied to front of center frame
during shipping. The bypass
and lock valves will
need mounted in proper location as shown and hoses
routed correctly before front trusses
and hitch are in-
stalled so front weight kits may be installed or removed
without taking hoses or valves loose. The hoses need
to route in locations shown with arrows, on top of wing
brace
to outside of tubes then back to inside. Install
front trusses on top of hoses as shown. Set them 1
11/16” (bypass valve bracket) and 3” (lock valve brack-
et) from truss plates as shown. See “Valve Brackets &
Valves 3500-4000” on page 11 for proper mounting in-
structions.
1
2
3
Figure 8
Valve Brackets & Hoses 1800-3000
42425
4 4
5
1 2
3
4
5
4
1
2
Figure 9
Valve Brackets & Hoses 3500-4000
42867
3
3
4
1 2
3
4
3