Great Plains 4000TM Predelivery Manual - Manual (Page 8)

586-288Q Table of Contents Index 11/06/2012
4 1200-4000TM Table of Contents Index Great Plains Manufacturing, Inc.
Introduction
The Turbo Max has been designed with care and built by
skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The 1200-4000TM Turbo Max is a one, three or five sec-
tion “vertical” tillage tool. Working width ranges from 12 to
40 feet. The implement is designed to cut and size resi-
due, till soil for faster seedbed warming, break up soil
crust on hard dried fields while eliminating compaction
layers. The front and rear gangs may be adjusted from 0-6
degree angle, depending on the aggressiveness desired.
Various finishing attachments are also available to further
smooth, redistribute residue, kill weeds, and break clods
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
❑ Before assembling, read and understand “Important
Safety Information” in front part of this manual.
❑ Have at least two people on hand while assembling.
❑ Make sure area is level and free of obstructions (pref-
erably an open concrete area).
❑ Have all major components
❑ Have all fasteners and pins shipped with machine.
1200TM 12’ (7.5in) spacing
1500TM 15’ (7.5in) spacing
1800TM 18’ (7.5in) spacing
2400TM 24’ (7.5in) spacing
3000TM 30’ (7.5in) spacing
3500TM 35’ (7.5in) spacing
4000TM 40’ (7.5in) spacing
586-288Q Pre-Delivery Manual (this document)
586-288M Operator Manual
586-288P Parts Manual
Figure 1
1800 Turbo Max
42399