Great Plains 8-10m Press Range SN 12672+ Operator Manual - Manual (Page 11)

11 8-10m Press Range
Operating Instructions
1.3 Operational Safety
The machine is to be put in operation only
after instruction has been provided by an
employee of the authorised dealer or an
employee of SIMBA. The “Machine
Registration” form is to be completed and
returned to SIMBA.
All protective and safety equipment, such
as removable protective equipment, must be
in place and functioning reliably before the
machine is put in use.
Check screws and bolts regularly for
tightness and retighten if necessary.
In the event of malfunctions, stop and
secure the machine immediately.
Ensure that any faults are remedied
immediately.
1.3.1 No Liability for
Consequential Damage
The Press has been manufactured by SIMBA
with great care. However, problems may still
occur when it is used for the intended purpose.
These may include:
„ Worn wearing parts.
„ Damage caused by external factors.
„ Incorrect driving speeds.
„ Incorrect setting of the unit (incorrect
attachment, non-adherence to the
Setting instructions).
Therefore, it is crucial to always
check your machine before and
during operation for correct
operation and adequate application
accuracy.
Compensation claims for damage which has
not occurred to the machine is excluded. This
includes any consequential damage resulting
from incorrect operation.
1. Safety Data
1.4 Road Traffic Safety
When driving on public roads, tracks and
areas, it is important to observe the relevant
road traffic laws as well as the specific
regulations relating to this machine.
Pay attention to the permitted axle
loads, tyre carrying capacity, and
total weight in order to maintain
adequate braking and steerability.
Passengers on the machine are
strictly forbidden!
Max. road transport speed 16mph
(25km/h).