Great Plains 8-10m Press Range SN 12672+ Operator Manual - Manual (Page 21)

21 8-10m Press Range
Operating Instructions
4. Adjustment / Operation
4.1.2 X-Press
1. Hitch
2. Parking Jack
3. Drawbar
4. Wing Catcher
5. Transport Wheels
6. Wheel Cylinders
7. Out-Rigger Units
8. Discs
9. Levelling Board (if fitted)
10. Single Row 700DD Roll
11. Roll Depth Adjuster
12. Wing Fold Cylinders
13. Levelling Board Cylinders
14. Out-Rigger Adjuster (Vertical)
15. Out-Rigger Adjuster (Lateral)
16. Main Tilt Cylinders
17. Wing Catcher Cylinders
1 2
3
4
5
6
7
8
9
10
17
16
11 15
14
12 13
In the X-Press configuration the machine can
be used in reduced tillage systems to
incorporate stubble or to work down
ploughing on lighter soil types. Due to the
massive clearances throughout the machine
the X-Press can operate in situations where
high levels of surface trash exist . The X-Press
is designed for high speed operation, 8-12
km/h with high volumes of trash flow being
added by the 700mm DD roller at the rear.
Fig. 4.02: Simba 8-10m X-Press