Great Plains 3N-3020 Material Rate - Manual (Page 13)

4/28/2004 196-366B
Great Plains Mfg., Inc. 13
Refer to Figure 23
After Calibration rotation has ended, this screen
will appear. Weigh the seed captured from the
three feeder cups with an accurate scale and di-
vide this amount by three.
Refer to Figure 24
Enter the actual amount measured using the Up/
Down arrow keys. Press FUNCTION key to ad-
vance to next window.
Refer to Figure 25
A new calibration number is suggested, along
with the Old calibration number. Press FUNC-
TION key to advance to the window shown in
Figure 26 on the next page.
Figure 23
Figure 24
Figure 25