Introduction, Products covered, Document family – Great Plains 3PNG15 Material Rate User Manual
Page 3: Setting planting rate
12/01/2010
202-579B
Great Plains Manufacturing, Inc.
Introduction
1
Introduction
This manual is your guide to drill adjustments for achiev-
ing specific seed population targets. Although some
setup/adjustment material herein is repeated from the
Operator’s Manual, you need to be thoroughly familiar
with drill operations and adjustments before applying this
Seed Rate manual and its table data.
Products Covered
3PNG12
12ft 3-Point Native Grass Drill, 2007+
3PNG15
15ft 3-Point Native Grass Drill, 2007+
Document Family
202-553M
Operator’s Manual
202-553P
Parts Manual
202-579B
Seed Rate Charts (this manual)
This manual relies on information found only in your
Operator’s Manual. Have both available when preparing
to plant.
Setting Planting Rate
There are four steps to obtaining the desired number of
seeds per acre:
1.
Know the characteristics of the seed.
Consult your seed supplier’s reference documents.
2.
Find your settings in the charts:
• Main Seed Box, page 6.
• Small Seeds Box, page 13.
• Native Grass Seeds Box, page 15 (Native Grass
mixes other than Brome require calibration).
3.
Set the rate for the seed box in use:
• Main Seed Box, page 2.
• Small Seeds Box, page 10.
• Native Grass Seeds Box, page 15.
4.
Check planting rate:
• Main Seed Box, page 5.
• Small Seeds Box, page 12.
• Native Grass Seeds Box, page 15.
The charts are based on original factory tires, and
cleaned, untreated seed of average size and test weight.
Many factors affect field results, including field condi-
tions, foreign material, seed size, seed treatment and tire
pressure. Minor adjustments are likely to be needed.
26253