Yp2425 center section smartbox frames, Yp2425 center section box frames, Or model yp2425, skip to step 40 – Great Plains Smartbox Mount Kit Yield Pro Planters User Manual

Page 13

Advertising
background image

Great Plains Mfg., Inc.

Installation Instructions

13

12/12/2006

403-206M

YP2425 Center Section Smartbox Frames

For ease of access, mount the two inner-most center
section Smartbox frames first.

Note: Whether the entire center section will have four or

six Smartboxes total, the tube between the cylin-
ders always has two.

Note: Meters may need to have one or both exit ports

biased Left or Right. Consult the table on page 8
before installing base container/[splitter]/meter
assemblies.

YP2425 Center Section Box Frames

Refer to Figure 21 and Figure 22

40. Select:

one

Smartbox frame,

two (18) 403-319D,
(SMART BOX HOLD DOWN CLAMP),
two (27) 802-223C,
(HHCS 3/8-16X4 GR5),
two (26) 802-079C,
(HHCS 3/8-16X1 1/4 GR5), and
four (31) 803-209C,
(NUT FLANGE LOCK 3/8-16 PLT)

41. Insert a 1

1

4

in bolt (26) in the slotted mounting hole

near center

on one side of the frame

. Slip the

shorter end of a clamp (18) over the bolt (26) and
add a flange lock nut (31). Put only a few turns on
the nut.

42. Position the frame

Left of center on the tube

per in Figure 21, clamp (18) to machine front.

43. Insert a 4in bolt (27) in the forward slotted hole

of the frame

, and then down through the hole in

the clamp (18), and add a flange lock nut (31). Put
only a few turns on the nut.

44. Repeat Step 33 through Step 35 for the other side

of the frame

.

45. Position Smartbox base container/meter or

container/splitter/meter assembly

in the frame

, having the meter ports biased per the table on

page 8, and secure with fasteners provided by
AMVAC.

46. Repeat Step 41 through Step 45 for the inner-most

center section box just Right of center.

47. Repeat Step 41 through Step 46 for the two box

frames to the outside of the center tube of the cen-
ter section.

48. Repeat Step 41 through Step 45 for the box frames on the outside tubes of the center section.

Note: If the outer tubes have only one box, mount it to the outside, as shown at

in Figure 21.

Figure 21

Center Section Box Frames

25207

U

D

F

B

L

R

Figure 22

YP2425 Center Mount

25328

18

27

31

26

U

D

F

B

L

R

18

Advertising