Great Plains Smartbox Mount Kit Yield Pro Planters - Manual (Page 17)

Great Plains Mfg., Inc.
Installation Instructions 17
12/12/2006 403-206M
Attach Hoses to T-Banders
Refer to Figure 28
For each row unit, repeat Step 65 through Step 62:
69. Select:
one (24) 800-321C,
(HOSE CLAMP NO.12 3/4 ID)
70. Place the hose clamp (24) over the T-Bander tube
(12).
71. Slide the cut hose (38) by at least 1
1 ⁄
2
in.
72. Using hose clamp pliers, open the hose clamp (24)
and lift it up about
3 ⁄
4
in onto the hose. Release to
clamp hose in position.
Install Other Smartbox Components
Refer to AMVAC documentation for instructions regard-
ing Controller, MTU, wiring harness and radar connec-
tion.
Installation Reference Information
Figure 28
Hose Attach at T-bander
24181
24
12
38
Torque Values
Fastener/Fitting Ft-Lbs N-m
1 ⁄
4
-20 GR5
8 11
3 ⁄
8
-16 GR5
31 42
1 ⁄
2
-13 U-bolt
105 76
5 ⁄
8
-11 U-bolt
205 150