Great Plains TC5319 Assembly Manual - Manual (Page 3)

Great Plains Manufacturing, Inc. Cover Index iii
04/12/2012 Cover Index 566-046E
© Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ......................................1
Introduction ..................................................................4
Description of Unit ..........................................................4
Models Covered .............................................................4
Document Family ...........................................................4
Tools Required ...............................................................4
Pre-assembly Checklist..................................................4
Using This Manual..........................................................5
Definitions...................................................................5
Shipping Inventory..........................................................6
Unloading .......................................................................6
Unpacking Components .............................................6
Unload Smaller Items First .........................................6
Unpacking Boxes .......................................................6
Assembly and Setup Assistance ................................6
Assembly ......................................................................7
5109-5315 Center Transport ......................................7
5317-5323 Center Transport ......................................7
5317-5323 Wing Transport.........................................8
Center Lift & Gang Mount...........................................8
Trusses.....................................................................10
Hitch & Center Lift Assembly....................................12
5109-5315 Center Fold ............................................14
5317-5323 Center Fold ............................................14
5313-5315 Wings .....................................................15
5317-5323 Wings .....................................................16
569-190S Shank.......................................................18
569-196S Shank.......................................................18
Turbo Gang ..............................................................19
Depth Gauge ............................................................19
Valve, Fitting and Hose Assembly................................20
Depth Stop ...............................................................20
Install Rebound Valve and O-Ring Fittings...............20
Bypass Valve............................................................21
Pilot Check Valve .....................................................21
Install Depth Control Valve and O-Ring Fittings .......21
Install Hose Handle and JIC Fittings ........................22
Attach Hose Clamps and Hose wraps......................23
Hydraulic Hose Hookup............................................23
Hose Handles ...........................................................24
Purging Hydraulic System ........................................24
Lights ........................................................................25
Install Rear Hitch (optional) ......................................25
Completing Setup .....................................................26
Appendix..................................................................... 27
Torque Values Chart .................................................... 27
Tire Inflation Chart ....................................................... 28
Hydraulic Connectors and Torque ............................... 28
TC5109-TC5315 Hydraulic Lift Layout......................... 29
TC5317-TC5323 Hydraulic Lift Layout......................... 30
TC5313-TC5315 Hydraulic Fold Layout ...................... 31
TC5317-TC5323 Hydraulic Fold Layout ...................... 32
TC5109 Hydraulic Gang Layout................................... 33
TC5111-TC5323 Hydraulic Gang Layout..................... 34
TC5109 Machine Layout .............................................. 35
TC5111 Machine Layout .............................................. 36
TC5113 Machine Layout .............................................. 37
TC5115 Machine Layout .............................................. 38
TC5313 Machine Layout .............................................. 39
TC5315 Machine Layout .............................................. 40
TC5317 Machine Layout .............................................. 41
TC5319 Machine Layout .............................................. 42
TC5321 Machine Layout .............................................. 43
TC5323 Machine Layout .............................................. 44
Twisted Shovel Layout (9 13 17 21 Shank) ................. 45
Twisted Shovel Layout 11 15 19 23 Shank) ................ 46
TC5109 Chopper Reel Layout ..................................... 47
TC5111 Chopper Reel Layout ..................................... 48
TC5113 Chopper Reel Layout ..................................... 49
TC5115 Chopper Reel Layout ..................................... 50
TC5313 Chopper Reel Layout ..................................... 51
TC5315 Chopper Reel Layout ..................................... 52
TC5317 Chopper Reel Layout ..................................... 53
TC5319 Chopper Reel Layout ..................................... 54
TC5321 Chopper Reel Layout ..................................... 55
TC5323 Chopper Reel Layout ..................................... 56
TC5109 Buster Bar Layout .......................................... 57
TC5111 Buster Bar Layout .......................................... 58
TC5113 Buster Bar Layout .......................................... 59
TC5115 Buster Bar Layout .......................................... 60
TC5313 Buster Bar Layout .......................................... 61
TC5315 Buster Bar Layout .......................................... 62
TC5317 Buster Bar Layout .......................................... 63
TC5319 Buster Bar Layout .......................................... 64
TC5321 Buster Bar Layout .......................................... 65
TC5323 Buster Bar Layout .......................................... 66
Index............................................................................ 69