Great Plains 606NT Predelivery Manual - Manual (Page 7)

8/19/2009 151-061Q
5 Assembly
9. Check that all safety decals and reflectors are
located correctly and legible. Replace if im-
properly located or damaged. Refer to “Safety
Decals” in the operator’s manual.
10. Inflate tires to recommended pressure as list-
ed on the “Tire Inflation Chart,” in operator’s
manual. Tighten wheel bolts as specified on
“Torque Values Chart,” in operator’s manual.
Tongue Assembly
See Figure 1:
1. With the aid of a fork-lift, overhead hoist or
loader, lift the tongue (1) into place to the
mounting brackets (2).
2. Pin tongue to mountings with 1 x 3-3/8 inch
hitch pins (3).
3. Pin hitch turnbuckle (4) to drill frame (5) with
1 x 3-3/8 inch hitch pins (6).
Figure 1
Tongue Installation
18723