Great Plains 606NT Predelivery Manual - Manual (Page 8)

605NT and 606NT
151-061Q 8/19/2009
6
Hydraulic Hoses and Wiring
See Figure 2:
Figure 2
Hose and Wiring Routing
18724
1. Unwind hydraulic hoses and light wiring har-
ness from drill frame.
2. Route hydraulic hoses (1) and light wiring har-
ness (2) inside tongue as shown.
See Figure 3:
3. Plug in light harness extension (3) to wiring
harness.
4. Clamp together hydraulic hoses with plastic
hose label (4) and red and blue cable ties (5).
Figure 3
Hose and Wiring Routing
18725