Great Plains 8560 FCF Assembly Manual - Manual (Page 8)

560-483Q-ENG 02/10/2014
4 8323-8560FCC Great Plains Manufacturing, Inc.
Introduction
The Field Cultivator has been designed with care and
built by skilled workers using quality materials. Proper
setup, maintenance, and safe operating practices will help
the customer get years of satisfactory use from the
machine.
Description of Unit
The Field Cultivator, is a three or five-section seedbed
preparation tillage tool. Working width ranges from 23 to
60 feet. The implement is designed for secondary field
operations to smooth, level, eliminate weeds and incorpo-
rate chemicals. Various finishing attachments are avail-
able to further smooth, redistribute residue, firm soil and
break clods.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major componets
5. Have all fasteners and pins shipped with Field Culti-
vator.
8323FCC 23-Foot 3-section
8328FCC 28-Foot 3-section
8332FCC 32-Foot 3-section
8336FCC 36-Foot 3-section
8539FCC 39-Foot 5-section
8544FCC 44-Foot 5-section
8548FCC 48-Foot 5-section
8551FCC 51-Foot 5-section
8556FCC 56-Foot 5-section
8560FCC 60-Foot 5-section
560-483Q-ENG Assembly Manual (this document)
560-483Q Pre-Delivery Manual
560-483M Operator Manual
560-483P Parts Manual
Figure 1
Field Cultivator
41882