Great Plains P12719 2005 - Manual (Page 20)

Flatliner 500
Operating Instructions
20
4.2 Tines
The Flatliner 500 is fitted with with Pro-Lift
tines and points. The tines are arranged in a
‘V‘ frame to give lower draft requirements and
the ability to work progressively deeper.
Different wings are available to suit the soil
conditions and optimise the performance of
the machine.
Coarse tine depth is achieved by moving the
tines up and down in the adjustable clamps
(main working depth is set using the rear roll).
Two additional tines may be added to each
machine to reduce the inter-tine spacing.
Standard Wing
P09060
• Maximum soil disturbance with
minimum draft requirement under normal
circumstances.
• Wing angle reduces wear rates on leg.
Extra Lift Wing
P10392
• Increased lift height and and rake angle
creates greater soil disturbance on all soil
types especially in moister conditions.
• Lower relative distance between edge
of wing and point reduces draft requirement.
• Has ability to work at lower depths with
no decrease in soil disturbance or risk of
smear.
Extra Wide Wing
P10411
• Improved lateral shatter in moist/wet
soils, or non-cohesive soils.
• Ideal for deep vegetable applications
under light/medium soils.
4.3 Pro-Lift Wings
4. Adjustment / Operation
Wear Shroud
P11181
• Wear plate to take soil abrasion so
lower trailing edge of tine does not wear.