Great Plains P12719 2005 - Manual (Page 7)

7 Flatliner 500
Operating Instructions
Table of contents
Machine Identification ............................. 5
Introduction ............................... 8
Foreword ............................................... 8
Warranty Guidelines ............................... 8
1. Safety Data ............................ 9
1.1 Safety Symbols ................................ 9
1.2 Use for the Intended Purpose ......... 11
1.3 Operational Safety ......................... 11
1.3.1 No liability for Consequential Damage 11
1.4 Traffic Safety .................................. 12
1.5 Accident Prevention ....................... 12
1.5.1 Hitching-up the Machine .............. 12
1.5.2 Connection of the Hydraulic System 12
1.5.3 Changing Equipment ................... 13
1.5.4 During Operation ......................... 13
1.6 Servicing and Maintenance ............ 13
1.7 Maintenance Areas ........................ 14
1.8 Authorised Operators ..................... 14
1.9 Protective Equipment ..................... 14
2. Transportation/Installation . 15
2.1 Delivery .......................................... 15
2.2 Transportation ................................ 15
2.3 Installation ...................................... 15
2.5 When Driving on the Road .............. 16
2.5.1 Hitching-up the Machine .............. 16
2.5.1.1 Connecting the Hydraulic System 16
2.6 Parking the Machine....................... 16
3. Technical Data .................... 17
4. Adjustment/Operation ......... 18
4.1 Description .................................... 18
4.1.1 Mounted Machines ...................... 18
4.1.2 Trailed Machines ......................... 19
4.2 Tines .............................................. 20
4.3 Pro-Lift Points ................................ 20
4.4 Double Disc Roll ............................ 21
4.5 DD Light Roll ................................. 21
4.6 Scraped Crumbler .......................... 21
4.7 Aqueel Roll ..................................... 21
4.8 Operation ....................................... 22
4.8.1 Mounted Machine Operation........ 22
4.8.2 Trailing Kit Operation ................... 24
4.9 Work Instructions ............................ 25
4.10 Checks ........................................ 25
5. Servicing and Maintenance 26
5.1 Servicing ........................................ 26
5.2 Cleaning ........................................ 26
5.3 Changing Tine Points and Wings .... 26
5.4 Preparation for Storage .................. 27
5.5 Operator Support ........................... 27
5.6 Maintenance Intervals ..................... 27
5.7 Maintenance Overview ................... 28
5.8 Overview of Lubricating Points ....... 29
5.9 Lubricating the Machine ................. 30
5.9.1 Handling of Lubricants ................. 30
5.9.2 Hygiene ....................................... 30
5.9.3 Storage and Handling .................. 30
5.9.4 Measures in case of injury through oil.. 31
5.9.5 Oil Spills ...................................... 31
5.9.6 Oil Fires ...................................... 31
5.9.7 Waste Oil Disposal ..................... 31
5.9.8 Lubricants & Hydraulic Oil ............ 31
5.9.9 Hydraulic System......................... 31
5.9.10 Lubricants ................................. 31
6. Faults and Remedies........... 32
7. Parts & Assembly ................ 33
7.1Parts & Assembly Contents ............. 33
Table of Contents