Great Plains 3P1006NT Assembly Instructions - Manual (Page 16)

Great Plains Manufacturing, Inc.
Corporate Office P.O. Box 5060
Salina, Kansas 67402-5060 USA
16 Front Page Part Lists
151-181M Front Page Part Lists 05/05/2011
Existing Parts Affected
The following existing parts are involved in the kit instal-
lation. The Disposition column indicates whether the part
is left in place, moved or not re-used. The part call-out numbers in the list matches all Figures
in the installation instructions. The descriptions match
those in your implement Parts manual.
Abbreviations
Callout
Part Number Part Description
61 124-040A LIFT ASSIST ASSEMBLY Removed and reinstalled.
62 124-044H LIFT ASSIST GW ARM Removed and reinstalled.
63 124-045K LIFT ASSIST MOUNT ASSEMBLY Removed. Not reused.
64 124-046H TRANSPORT LOCK PIN Removed and reinstalled.
65 124-159D CASTER CAP Removed and reinstalled.
66 161-116D LIFT ASSIT CASTER SHAFT Removed and reinstalled.
67 266-012D PLATE RND 3/16" THK 1 7/8" DIA Removed and reinstalled.
68 266-020D UHMW RND 2.0 DIA X 2.0 LONG Removed and reinstalled.
69 800-239C 1.125 WIRING AND TUBE CLIP Removed and reinstalled.
70 802-017C HHCS 3/8-16X1 GR5 Removed and reinstalled.
71 802-034C HHCS 1/2-13X1 1/4 GR5 Removed and reinstalled
72 802-067C HHCS 3/4-10X4 GR5 FTHD Removed and reinstalled.
73 802-258C HHCS 1/2-13X1 GR5 Removed and reinstalled.
74 803-014C NUT HEX 3/8-16 PLT Removed and reinstalled.
75 803-048C NUT HEX JAM 3/4-10 PLT Removed and reinstalled.
76 804-013C WASHER LOCK SPRING 3/8 PLT Removed and reinstalled.
77 804-015C WASHER LOCK SPRING 1/2 PLT Removed and reinstalled.
78 807-143C SPRING COMP 1.88OD x .362W Removed and reinstalled.
79 811-312C TE 9/16MJIC Removed. Not reused.
80 841-285C HH1/4R2 58 9/16FJIC 9/16MORB90 Removed. Not reused.
81 841-286C HH1/4R2 134 9/16FJIC 1/2MNP Removed. Not reused.
82 890-072C BUSHING 2 1/2 X 2 1/4 X 2 LG. Removed and reinstalled.
3P 3-Point MORB Male O-ring Boss (thread fitting)
FTHD Full Threaded MNT Mount
GR5 Grade 5 PL/PLT Plate/Plated
GW Gauge Wheel PVT Pivot
HHCS Hex Head Cap Screw RH Right Hand
JIC Pipe Thread 37 Degree Flare Fitting RND Round
LG Large/Long SAE Society of Automotive Engineers
LH Left Hand THD Thread
LW/PIN Length With Pin UNF Unified National Fine (Screw Thread)
LWR Lower WLDMNT Weldment
MJIC Male JIC W/WO With/Without