Great Plains 2525P Parts Manual - Manual (Page 73)

Revision Comments Part Description Part No. Ref.
Image No. dwg22757
118-433DG HANDLE 199-011D 1.
PW HANDLE SPACER TUBE 199-015D 2.
Used on long (rear) stagger row units
on twin row spacing.
25P LH OFFSET PW MOUNT 199-058H 3.
Used on long (rear) stagger row units
on twin row spacing.
25P SHORT PW MOUNT EXTENSION 199-061H 4.
25P PW HANDLE SPACER TUBE 199-088D 5.
1/4 PW SPACER 5/8 DIA 405-031D 6.
HHCS 7/16-14X1 3/4 GR5 802-113C 7.
HHCS 5/8-11X3 1/4 GR5 802-160C 8.
NUT HEX 5/8-11 PLT 803-021C 9.
NUT HEX FLANGE LOC 7/16-14 PLT 803-229C 10.
WASHER LOCK 7/16 PLT 804-014C 11.
WASHER LOCK SPRING 5/8 PLT 804-022C 12.
WASHER FLAT 7/16 SAE PLT 804-041C 13.
PIN COTTER 1/8 X 3/4 805-067C 14.
PIN CLEVIS 7/16 X 3 17/64 USBL 805-183C 15.
SPRING EXT 1 7/8ODX8 3/8X.25W 807-113C 16.
20 SER PW ARM PIVOT SPACER TB 890-524C 17.
BUSHING 3/4OD X 5/8ID X 1/2 LG 890-598C 18.
Refer to "1" X 12" & 1 1/4" X 13" Press
Wheel Assembly Breakdowns" for
breakdown
1 X 12 PRESS WHL ASSY-5203BRG 814-174C 19.
Refer to "1" X 12" & 1 1/4" X 13" Press
Wheel Assembly Breakdowns" for
breakdown
1.25 X 13.5 PRESS WHEEL ASSY 814-238C 20.
08/22/12 - 73 - 118-915P
Table of Contents Part Number Index
Press Wheels
25 Series Press Wheel Assembly LH Short
(Applies to 2525P (2006-) only)