Great Plains 2525P Parts Manual - Manual (Page 85)

Revision Comments Part Description Part No. Ref.
Image No. dwg22842
LONG 1X12 SING OPENER PW MOUNT 199-024H 1.
PIN CLEVIS 7/16 X 2 9/64 USABL 805-295C 2.
LONG 1X12 PW HANDLE SPACER TB 199-050D 3.
118-433DG HANDLE 199-011D 4.
PIN COTTER 1/8 X 3/4 805-067C 5.
1/4 PW SPACER 5/8 DIA 405-031D 6.
Refer to "1" X 12" & 1 1/4" X 13" Press
Wheel Assembly Breakdowns" for
breakdown
1 X 12 PRESS WHL ASSY-5203BRG 814-174C 7.
HHCS 5/8-11X3 1/4 GR5 802-160C 8.
WASHER LOCK SPRING 5/8 PLT 804-022C 9.
NUT HEX 5/8-11 PLT 803-021C 10.
HHCS 7/16-14X1 1/2 GR5 802-029C 11.
WASHER LOCK 7/16 PLT 804-014C 12.
WASHER FLAT 7/16 SAE PLT 804-041C 13.
BUSHING 3/4OD X 5/8ID X 1/2 LG 890-598C 14.
20 SER PW ARM PIVOT SPACER TB 890-524C 15.
NUT HEX FLANGE LOC 7/16-14 PLT 803-229C 16.
SPRING EXT 1.5OD X .25 X 11.25 807-184C 17.
Refer to "1" X 12" & 1 1/4" X 13" Press
Wheel Assembly Breakdowns" for
breakdown
1.25 X 13.5 PRESS WHEEL ASSY 814-238C 18.
08/22/12 - 85 - 118-915P
Table of Contents Part Number Index
Press Wheels
20 Series Double "V" Press Wheel Long
(Applies to 2520P (2006-) only)