Great Plains NG12 Operator Manual - Manual (Page 8)

NG12
202-457M 8/5/2004
6
Safety Decals
Your seeder comes equipped with all safety de-
cals in place. They were designed to help you
operate your seeder safely.
▲ Read and follow decal directions.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order
new decals from your Great Plains dealer.
Refer to this section for proper decal place-
ment.
▲ When ordering new parts or components, also
request corresponding safety decals.
▲ To install new decals:
1. Clean area on which decal is to be
placed.
2. Peel backing from decal. Press firmly on
surface, being careful not to cause air
bubbles under decal.
818-055C
Slow Moving Vehicle
19950
19950
838-266C
Red Reflectors
Reflector at both ends of drill; two reflectors total
838-267C
Daytime Reflectors
Reflector at both ends of drill; two reflectors total
19950