Password – Great Plains 3S-4000F Operator Manual User Manual

Page 52

Advertising
background image

48

3S-4000

Table of Contents

Index

Great Plains Manufacturing, Inc.

195-394M

Table of Contents

Index

2014-06-10

Password

The password function allows you to protect the total
acre count, pulses per mile and width settings with a
password. This stops anyone from accidentally changing
those settings. When the acre counter is shipped, the
password is disabled. You can modify the pulses per mile
and implement width at any time.

Press the FUNC button until the “PASS” icon appears.
The digits will display the word “Ent” or “dIS”

If the display shows “dIS”

Refer to Figure 51
The password is disabled. The total acre count, pulses
per mile, width and password settings can be adjusted
using the up and down buttons. The password can also
be changed using the up and down buttons.

If the display shows “Ent”

Refer to Figure 52
You must enter your password using the UP and DOWN
buttons. When your password is displayed, press the
FUNC button to test the password. If the password is
correct, you will be able to change the acre counter
settings. The password will be viewable until the acre
counter powers down. When the acre counter is powered
up again, you will have to re-enter the password to
change settings.

If the password is not correct, you will not be able to
change the acre counter settings. When the “PASS”
function is selected again, “Ent” will appear in the
display.

Changing the password

Refer to Figure 53

Select a new password using the UP and DOWN
buttons. Press the FUNC button until the word “SEt”
appears in the display. Release the FUNC button. The
number in the display is your new pass code. Make sure
you write it down! To disable the password, try setting it
to 0000. Press and hold the FUNC button until the word
“dIS” appears in the display.

If the password is forgotten, it can be disabled by
removing the batteries. The password is intended for
rental units. It is recommended that a seal be affixed to
the rear plate of the acre counter to determine if the
settings have been tampered with.

Figure 51

Password

PASS

Figure 52

PASS

Figure 53

PASS

Advertising
This manual is related to the following products: