Great Plains 3000TM Operator Manual - Manual (Page 9)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 5
10/29/2013 Table of Contents Index 586-536M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On the back of smv bracket, rear tube of
center frame;
1 total
838-615C
Amber Reflectors
Two on front of light brackets. Two on outside of
center brace bar. Two on side of center frame.
Two on rear of finishing attachment (not shown),
visible from side while folded for transport;
8 total
42191
42239
42191
43093