Great Plains CF600 Predelivery Manual - Manual (Page 4)

2
Introduction
CF500 and CF600 Hydraulic Cross-Fold Boom 506-582Q 2/2/06
Great Plains Mfg., Inc.
Introduction
manual before assembling the machine. As a reference,
keep the operator’s manual on hand while assembling.
The information in this manual is current at printing. Some
parts may change to assure top performance.
Definitions
Right and left as used in this manual are determined by
facing the direction the machine will travel while in use un-
less otherwise stated.
NOTE: Useful information about the preceding topic.
Assembly and Setup Assistance
To order additional copies of predelivery instructions or
operator’s and parts manuals, write to the following ad-
dress. Include model numbers in all correspondence.
If you do not understand any part of this manual or have
other assembly or setup questions, assistance is avail-
able. Contact
Product Support
Great Plains Mfg. Inc., Service Department
P.O. Box 5060
Salina, KS 67402-5060
IMPORTANT: A crucial point of information about the
preceding topic. For safe and correct operation, read
and follow the directions provided before continuing.
Great Plains Manufacturing wants you to be satisfied with
any new machine delivered by the Great Plains Trucking
network. To ease the assembly task and produce a prop-
erly working machine, read this entire manual before as-
sembling or setting up new equipment.
Description of Unit
The CF500 and CF600 are a non-turf type, cross-folding
sprayer booms. The booms unfold hydraulically to an op-
erating width of 50 or 60 feet. The booms can be mounted
on a Great Plains trailer sprayer, three-point sprayer or
three-point hitch.
Intended Usage
Use this boom as part of a pressurized sprayer system to
apply liquid pesticides, herbicides or fertilizers to produc-
tion-agriculture crops only. Mount the boom on a Great
Plains trailer sprayer, single-axle sprayer, three-point
sprayer or three-point hitch only. Do not modify the boom
or use the boom with any tillage attachments.
Using This Manual
This manual was written to help you assemble and pre-
pare the new machine for the customer. The manual in-
cludes instructions for assembly and setup. Read this
manual and follow the recommendations for safe, efficient
and proper assembly and setup.
An operator’s manual is also provided with the new ma-
chine. Read and understand “Important Safety Informa-
tion” and “Operating Instructions” in the operator’s