Great Plains 4000TM Assembly Manual - Manual (Page 8)

586-536E Table of Contents Index 04/12/2013
4 1800-3000TM Table of Contents Index Great Plains Manufacturing, Inc.
Introduction
The Turbo Max has been designed with care and built by
skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The 1800-3000TM Turbo Max is a three section “vertical”
tillage tool. Working width ranges from 18 to 30 feet. The
implement is designed to cut and size residue, till soil for
faster seedbed warming, break up soil crust on hard dried
fields while eliminating compaction layers. The front and
rear gangs may be adjusted from 0-6 degree angle,
depending on the aggressiveness desired. Various finish-
ing attachments are also available to further smooth,
redistribute residue, kill weeds, and break clods.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
❑ Before assembling, read and understand “Important
Safety Information” in front part of this manual.
❑ Have at least two people on hand while assembling.
❑ Make sure area is level and free of obstructions (pref-
erably an open concrete area).
❑ Have all major components
❑ Have all fasteners and pins shipped with machine.
1800TM 18’ (7.5in) spacing
2400TM 24’ (7.5in) spacing
3000TM 30’ (7.5in) spacing
586-536Q Pre-Delivery Manual
586-536M Operator Manual
586-536P Parts Manual
586-536E Assembly Manual (this document)
Figure 1
2400 Turbo Max
43133