Great Plains NP30A 30-foot Operator Manual - Manual (Page 139)

2014-05-20 Table of Contents Index 407-502M
Great Plains Manufacturing, Inc. Table of Contents Index 135
Appendix A - Reference Information
Specifications and Capacities
NP30A Models, U.S. Customary Units
NP30A
-11C30 -12C30 -13C30 -25C15
Model -11R30 -12R30 -13R30 -18R20
-11S30 -12S30 -13S30 -18S20
Row Count 11 12 13 18 25
Row Spacing 30 in. 30 in. 30 in. 20 in. 15 in.
Swath 27 ft. 6 in. 30 ft. 0 in. 32 ft. 6 in. 30 ft. 0 in. 31 ft. 3 in.
Working Width (Maximum) 26 ft. 11 in. 28 ft. 11 in. 31 ft. 7 in. 31 ft. 7 in. 31 ft. 7 in.
Transport Width 17 ft. 0 in.
Length (2 Point) 9 ft. 4 in.
Length (3 Point) 8 ft. 10 in. n/a
Length (Pull Type) 17 ft. 4 in.
Wing Flex 8° 8° 8° 8° 8°
Working Height 6 ft. 10 in.
Transport Height (Folded) 12 ft. 6 in.
2P/PT Transport Clearance 16 in.
3P Transport Clearance (depends on tractor 3-point hitch range) n/a
140 hp 155 hp 165 hp 225 hp 300 hp
1 or 2 Circuits, 2250 psi, 4 gal/min
7700 lbs 7900 lbs 8100 lbs 9600 lbs 11900 lbs
7200 lbs 7400 lbs 7600 lbs 8800 lbs n/a
11100 lbs 11300 lbs 11500 lbs 12800 lbs 15300 lbs
2P/PT Transport Tire Size 265/70B16.5 (10-16.5) NHS 8-Ply
PT Gauge Wheel Tire 265/70B16.5 (10-16.5) NHS 8-Ply
2P/3P Gauge Wheel Tire 20.5×8.0 10-Ply LR-E
3 to 7 inches
Rear Hitch Option: Schuck Model 850
Nurse Tank Capability 3000 Gallons
Metering System Raven Accuflow™ with CDS-JohnBlue Impellicone (Optional)
Controller Console* Raven SCS 450 (Optional)
1. Power requirements vary significantly with conditions and practices.
3. Release depth is 3/4 in. above knife/tine depth, or 3/8 in. above coulter depth.
* Implement functions not monitored include: pressure and temperature
Min. Tractor HP Req.¹
Hydraulic Circuits Req.
Weight, 2P (maximum)²
Weight, 3P (maximum)²
Weight, PT (maximum)²
10-16.5 NHS
10-Ply
12-16.5 NHS
14-Ply
10-16.5 NHS
10-Ply
12-16.5 NHS
14-Ply
Operating Depth³
2. With Great Plains-installed AccuFlow metering, Schuck hitch, coulters and spider sealers. All weights are approximate.