Great Plains NP30A 30-foot Operator Manual - Manual (Page 38)

34 NP30A or NP40A Table of Contents Index Great Plains Manufacturing, Inc.
407-502M Table of Contents Index 2014-05-20
Electrical Hookup
Refer to Figure 13
Your fertilizer applicator is equipped with systems that
require separate electrical connections. For future
reference, note any optional connectors on this checklist.
❑
Lighting connector (standard)
❑
Rate Controller connector (standard)
❑ Hydraulic harness
(2013+ 5-Section 2-point NP40A only)
❑
Pressure sensor
❑ Console speed connector (not shown, optional,
and only if sensor/radar is mounted on applicator)
❑ __________________________
Make sure tractor is shut down with accessory power off
before making connections.
These connections may be made in any order. The key
requirement is that all connections be made prior to
fertilizer applicator movement.
H
Figure 13
Connector Identification
25236
31083
34970
32019
L
C
P
L
C
H
P