Important safety information, Prepare for emergencies, Tire safety – Great Plains 1005NT Operator Manual User Manual

Page 5: Wear protective equipment, Avoid high pressure fluids hazard, Safety at all times

Advertising
background image

3

Important Safety Information

4/12/05

705 and 1005 End-Wheel No-Till Drill 150-213M

Great Plains Mfg., Inc.

Prepare for Emergencies

Be prepared if a fire starts.

Keep a first aid kit and fire extin-

guisher handy.

Keep emergency numbers for

doctor, ambulance, hospital and
fire department near phone.

Tire Safety

Tire changing can be dangerous and
should be performed by trained per-
sonnel using correct tools and equip-
ment.

When inflating tires, use a clip-on

chuck and extension hose long
enough to allow you to stand to
one side–not in front of or over tire
assembly. Use a safety cage if
available.

When

removing

and

installing

wheels,

use

wheel-handling

equipment adequate for weight
involved.

911

Wear
Protective Equipment

Wear

protective

clothing

and

equipment.

Wear

clothing

and

equipment

appropriate for the job. Avoid
loose-fitting clothing.

Because prolonged exposure to

loud noise can cause hearing
impairment or hearing loss, wear
suitable hearing protection such
as earmuffs or earplugs.

Because

operating

equipment

safely requires your full attention,
avoid wearing radio headphones
while operating machinery.

Avoid High
Pressure Fluids Hazard

Escaping fluid under pressure can
penetrate

skin,

causing

serious

injury.

Avoid the hazard by relieving

pressure

before

disconnecting

hydraulic lines.

Use a piece of paper or card-

board, NOT BODY PARTS, to
check for suspected leaks.

Wear protective gloves and safety

glasses or goggles when working
with hydraulic systems.

If an accident occurs, see a doc-

tor immediately. Any fluid injected
into the skin must be surgically
removed within a few hours or
gangrene may result.

Safety at All Times

Thoroughly read and understand this
manual before operating implement.
Refer to Safety Decals, page 4. Read
all instructions noted on decals.

Be familiar with all implement

functions.

Operate implement from driver’s

seat only.

Do not leave tractor or implement

unattended with engine running.

Do not dismount a moving tractor.

Dismounting a moving tractor could
cause serious injury or death.

Do not stand between the tractor

and implement during hitching.

Keep hands, feet and clothing

away from power-driven parts.

Wear snug-fitting clothing to avoid

entanglement with moving parts.

Watch out for wires, trees, etc.,

when raising implement. Make
sure all persons are clear of work-
ing area.

Do not turn tractor too tight, caus-

ing implement to ride up on
wheels.

Advertising
This manual is related to the following products: