Great Plains Detracker Assembly Instructions - Manual (Page 5)

02/24/2014 589-386q
Great Plains Manufacturing, Inc. 1
General Information
These Instructions explain how to install the Detracker on
the front of the center gang hanger. The unit will be
shipped with the detracker mounts banded together. The
utility coulters will be pre-assembled from the factory. The
rest of the smaller parts will be shipped in a box.
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of the machines
Operator’s Manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major componets
5. Have all fasteners and pins shipped with Detracker.
6. Be sure and have a copy of all manuals of the
machine you are mounting the Detracker on.
Document Family
7. If you do not have a copy of all the manuals that per-
tains to your machine, you may go to www.great-
plainsmfg.com and all the manuals will be online.
8. If you need further assistance after reading all the
manuals, assistance is available. Contact:
Product Support
Great Plains Mfg., Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
[email protected]
1-800-255-9215
589-386Q Assembly & Parts Manual (this document)
586-201Q Assembly Manual
586-201M Operator Manual
586-201P Parts Manual
586-229Q Assembly Manual
586-239M Operator Manual
586-239P Parts Manual
Figure 1
Detracker
41628