Great Plains Detracker Assembly Instructions - Manual (Page 8)

4 Detracker Great Plains Manufacturing, Inc.
589-386q 02/24/2014
Install Coulter Hub Assembly
Refer to Figure 4
The hub assembly should come pre-assembled on swing
arm. Figure 4 shows a parts breakdown if you have to
take the assembly apart.
10. Align holes on coulter blade to bolts on hub
assembly , secure with lock washers and
nut .
11. Tightened hub bolts to specs, See “Torque Value
Chart” on page 6.
Coulter Hub Assembly Parts
19
51
50
47
45
48
49
45
46
52
25
43
42
53
44
45
42
Figure 4
Coulter Hub Assembly
43297
51
43 19
52
Callout Part Number Description Comment
42 822-020C BRG CUP LM-67010
43 200-039V COULTER HUB & CUP ASSY Includes items 25 & 43
44 816-009C OIL SEAL DOUBLE LIP
45 822-021C BRG CONE 1.25ID LM-67048
46 200-001D HUB GREASE CAP
47 204-379S COULTER HUB PACKAGE Includes items 25, 43-47
48 804-055C WASHER SPINDLE - 7/8
49 803-029C NUT HEX SLOTTED 7/8-14 PLT
50 805-017C PIN COTTER 3/16 X 1 3/4 PLT
51 820-215C 18 INCH TURBO COULTER BLADE
52 803-020C NUT HEX 1/2-13 PLT
53 802-214C RHSNB 1/2-13X1 1/4 GR5