Great Plains 3000TM Predelivery Manual - Manual (Page 23)

Great Plains Manufacturing, Inc. Assembly 19
03/19/2014 586-536Q
Proximity Sensor Adjustment
Refer to Figure 21
Note: Wings need to be folded up when adjusting the
proximity sensor to prevent damage to sensor
and bracket. Be sure and adjust proximity sensors
before unfolding. Be sure wing safety lock pins are
installed
73. Loosen nuts (one on front and one on back side of
sensor bracket, adjust the proximity sensor to 1/8”
to 1/4”, from front of proximity sensor to rear of
wing tube as shown.
74. Re-tighten nuts to secure proximity sensor .
1
2
1
3
4
2 1
Figure 21
Priority Sensor Adjustment 43015
2
4
3
1
2