Install wing gauge wheels, Install 2p/3p manual gauge wheels, 2p/3p gauge wheel stations – Great Plains NP30A 30-foot Predelivery Manual User Manual
Page 25: Install 2p/3p gauge wheel mounts
Great Plains Manufacturing, Inc.
Install Components
21
08/30/2011
407-313Q
Install Wing Gauge Wheels
If all the gauge wheels are already installed, continue at
topic “Install Wing Extensions” on page 24.
Continue at the topic for the gauge wheel type:
Install 2P/3P Manual Gauge Wheels.................. below
Install Pull-Type Wing Gauge Wheels .............page 23
Install 2P/3P Manual Gauge Wheels
If not installed for shipment, these assemblies may be
fully dismounted at the tool bar, or may have only the
wheels removed. If only the wheels need to be installed,
continue at topic “Install 2P/3P Wheels” on page 22.
2P/3P Gauge Wheel Stations
99. Before installing, determine the location for each
gauge wheel, which varies by row count.
Gauge wheels mount at row center-lines. This may place
one U-bolt against a rib. Do not straddle a rib.
Install 2P/3P Gauge Wheel Mounts
Refer to Figure 27
100. Select two:
407-321S 3PT GW ASSEMBLY
and four:
806-016C U-BOLT 5/8-11 X 6 1/32 X 5 3/4
and eight sets:
803-021C NUT HEX 5/8-11 PLT
804-022C WASHER LOCK SPRING 5/8 PLT
101. Secure the mounts at the gauge wheel stations
from the table above.
Continue at topic “Install Wing Extensions” on page 24.
Implement
Model
Gauge Wheel Station
RH
LH
NP30-11R30
Row 10
Row 2
NP30-12R30
Row 11
a
a. Note that if the wing extensions were not installed
for shipment (the usual case), the first and last
rows are not present (illustrated in gray). The first
present row on the LH wing is Row 2 and not
Row 1. Similarly, on the RH wing, row 12 (12 row)
or row 13 (13 row) is not yet installed.
Row 2
NP30-13R30
Row 11
Row 3
NP40-15R30
Row 13
Row 3
Figure 26
2P/3P Gauge Wheel Stations
31711
6
5
4
3
2
1
6
5
4
3
2
1
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
NP30-11R30
NP30-12R30
NP30-13R30
NP40-15R30
Figure 27
2P/3P Gauge Wheel Assembly
31706
70
24
64
57
24
70
57
64