Great Plains CP1000 Operator Manual - Manual (Page 38)

36
Section 5 Maintenance and Lubrication
CP1000 Three-Meter Drill and Hitch 148-358M 7/5/2005
Great Plains Mfg., Inc.
Coulter Swing Arm Pivot
Located on top of each coulter casting
Lubricant = Grease
Quantity = Until grease begins to emerge 12110
8
Coulter Hub Bearings
Located on each coulter hub
Lubricant = Grease
Quantity = Force grease into tapered roller bearings, but
do not pressurize cavity enough to blow out seal or hub
cap
12111
50
Seed-Cup-Drive Sprocket
Oil sprocket hub in its square bore. Squirt oil on the
square seed-cup shaft and move seed-rate handle back
and forth to get oil into the square.
Type of Lubrication = Oil 12126
Tongue to Main Frame Pivot
Located at rear of tongue
Lubricant = Grease
Quantity = Until grease begins to emerge
12112
8
Seasonally