Great Plains CP1000 Operator Manual - Manual (Page 6)

4
Important Safety Information
CP1000 Three-Meter Drill and Hitch 148-358M 7/5/2005
Great Plains Mfg., Inc.
21527
838-266C
Red Reflectors
Rear of walkboard
two decal total
838-265C
Amber Reflectors
Both ends of walkboard;
two decals total
Safety Decals
Your implement comes equipped with all safety decals in place.
They were designed to help you safely operate your implement.
1. Read and follow decal directions.
2. Keep all safety decals clean and legible.
3. Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
4. When ordering new parts or components, also request cor-
responding safety decals.
5. To install new decals:
a. Clean the area on which the decal is to be placed.
b. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
21527
21527
838-369C
Decal 25 KPH Transport
One on rear center