Great Plains YP625PD Operator Manual - Manual (Page 10)

6 YP625PD Table of Contents Index Great Plains Manufacturing, Inc.
401-754M Table of Contents Index 02/23/2011
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On the tube supporting meter pressurization manifold;
1 total
31026
838-266C
Red Reflectors
All configurations:
on the rear face of the outside seed hoppers (rear row on
twin- or triple-row),
With Markers:
on the rear face of the inner arm, above daytime
reflectors;
2 or 4 total
31822