Rain gauge device (flowshark) – ADS Environmental Services Profile Software 950015B6 User Manual
Page 130
2-90
Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
Edit Rain Gauge Device Properties
• Rain Per Tip Enter the amount of rainfall that must
accumulate in the tipping bucket to initiate one tip of the
tipping mechanism.
• Store Data (applies only to non-FlowShark or RainAlert II
monitors) Select this checkbox to ensure the monitor stores
the rain data. Profile stores rain data by default.
Rain Gauge Device (FlowShark)
Edit the rain gauge device for a FlowShark monitor in the following
way. For instructions on modifying the rain gauge device
parameters for RainAlert II and other monitors with this device,
refer to Rain Gauge Device on page 2-89 or Rain Gauge Device
(RainAlert II) on page 2-91.
Edit Rain Gauge Device Properties (FlowShark)
• Rain Per Tip Enter the amount of rainfall that must
accumulate in the tipping bucket to initiate one tip of the
tipping mechanism.
• Rain Intensity Interval Enter the amount of time within
which a specified amount of rainfall must occur to initiate a
rain alarm. Designate the amount of rain in the Rain Alarm
section of the Edit MLI Device Properties dialog
corresponding to the FlowShark monitor. Refer to MLI