ADS Environmental Services Profile Software 950015B6 - Manual (Page 515)

Balance Reporter 15-7
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Overflow from the dialog. QFinal flows from Upstream
monitoring points will be added to a flow composite. A "+"
symbol next to the monitoring point in the Selected list
indicates an Upstream monitoring point. QFinal flows from
Overflow monitoring points will be subtracted from a flow
composite. A "–" symbol next to the monitoring point in the
Selected list indicates an Overflow monitoring point.
5. Select OK to close and exit the dialog.
Creating the Schematic Using the Balance Reporter
Create temporary schematics using the Balance Reporter. The
Balance Reporter allows you to create a variety of flow scenarios
and generate preliminary balance reports. However, temporary
schematics can only be saved to a template. They cannot be saved
to the database. Use the Profile main screen to develop schematics
which are saved to the monitoring point.
1. From the Balance Reporter main screen, select the View >
Schematic > Manual option to display the Schematic
Definition dialog.
Schematic Definition dialog
2. Develop the schematic by selecting the upstream and overflow
monitoring points from the Available list and adding them to
the Selected list using the > button. Each time you add a
monitoring point to the Selected list, indicate the type of
monitoring point you are adding by selecting Upstream or