ADS Environmental Services Profile Software 950015B6 - Manual (Page 67)

Profile Main Screen 2-27
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
device during data collection. In addition, assign a device
to the monitoring point of the same number. For example,
always assign Peak Combo 1 only to Monitoring Point 1
and Peak Combo 2 only to Monitoring Point 2.
Note: The Smart Depth 1 and Smart Depth 2 devices
represent standalone ultrasonic depth sensors.
Note: The MLI 1, MLI 2, and Modem Setup devices
are not associated specifically with a sensor. MLI
represents special software (Basic Code) included in
Profile that is downloaded to the monitor upon activation
to support activities such as water quality sampling and
event notification. Modem Setup represents a list of
wireless communication provider’s carrier codes.
The selected devices display in the Monitoring Point Devices
section.
6. As necessary, edit the parameters corresponding to each device
in the following way:
 Select the device you want to edit from the Monitoring
Point Devices section, and then select the Edit button.
The Edit [device type] Parameters dialog displays for the selected
device. Please note that each device dialog contains default
settings.
 Edit the device parameters. Refer to the information
corresponding to the particular device (in the following
sections) for details concerning the specific parameters.
Some device dialogs include multiple tabs representing
sensors or other tools that require editing. Refer to the
following sections for details concerning the specific
parameters corresponding to each device and any
associated sensors/tools. Select and edit each sensor/tool
tab as necessary.
 Select the OK button after editing the device parameters
and any associated sensors/tools.