Bio-Rad Firmware & Software Updates - Manual (Page 102)

CFX96 Touch, CFX96 Touch Deep Well, CFX Connect, and CFX384 Touch Systems Instruction Manual
89
Quantification Tab Spreadsheet
Table 25 shows the types of data shown in the spreadsheet at the bottom right side of the
Quantification tab.
TIP: To make changes to the Content, Target, and Sample, open the Plate Editor by
clicking the Plate Setup button and selecting View/Edit Plate.
Quantification Data Tab
The Quantification Data tab shows spreadsheets that describe the quantification data
collected in each well. Select one of the four options to show the data in different formats:
• Results. Displays a spreadsheet view of the data
• Standard Curve Results. Displays a spreadsheet view of the standard curve data
• Plate. Displays a view of the data in each well as a plate map
• RFU. Choose this spreadsheet to show the RFU quantities in each well for each cycle
TIP: Right-click any spreadsheet for options, including the sort option.
Trace Styles... Open the Trace Styles window to change trace styles that
appear on the Quantification and Melt Curve tabs
Baseline Thresholds... Open the Baseline Thresholds window to change the baseline
or thresholds of each fluorophore (changes appear in the
Amplification chart in the Quantification tab)
Table 25. Quantification tab spreadsheet content.
Information Description
Well Well position in the plate
Fluor Fluorophore detected
Target Target Name loaded in the Plate Editor wells
Content A combination of the Sample Type (required) and Replicate #
(optional) loaded in the Plate Editor
Sample Sample Name loaded in the Plate Editor wells
C
q
Quantification cycle for each trace