Bio-Rad Firmware & Software Updates - Manual (Page 108)

CFX96 Touch, CFX96 Touch Deep Well, CFX Connect, and CFX384 Touch Systems Instruction Manual
95
Plate Spreadsheet
Select the Plate spreadsheet (Figure 70) to view melt curve data in a plate format.
Figure 70. Plate spreadsheet in the Melt Curve Data tab.
NOTE: To adjust the peak that the software calls, adjust the threshold line in the
Melt Peak chart on the Melt Curve tab.
The Plate spreadsheet includes the types of information shown in Table 29.
RFU Spreadsheet
Select the RFU spreadsheet to view the fluorescence for each well at each cycle acquired
during the melt curve (Figure 71).
Figure 71. RFU spreadsheet in the Melt Curve Data tab.
Table 29. Plate spreadsheet content.
Information Description
Content A combination of Sample Type (required) and Replicate #
(optional)
Sample Sample description
Peak 1 First melt peak (highest)
Peak 2 Second (lower) melt peak