Bio-Rad Sub-Cell® Model 192 Cell - Manual (Page 2)

Warranty
Bio-Rad Laboratories warrants the Sub-Cell Model 96 and Model 192 electrophoresis systems against
defects in materials and workmanship for 1 year. If any defects occur in the instrument during this
warranty period, Bio-Rad Laboratories will repair or replace the defective parts free. The following
defects, however, are specifically excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an authorized
agent.
3. Use of fittings or other spare parts supplied by anyone other than Bio-Rad Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster.
6. Corrosion due to use of improper solvent or sample.
This warranty does not apply to parts listed below:
1. Platinum Electrode Wires
For any inquiry or request for repair service, contact Bio-Rad Laboratories after confirming the
model and serial number of your instrument.
To insure the best performance from the Sub-Cell electrophoresis systems, become fully acquainted
with these operating instructions before use. Bio-Rad recommends that you first read these instructions
carefully. Assemble and disassemble the unit completely without casting a gel. After these prelimi-
nary steps, you should be ready to cast and run a gel.
Bio-Rad also recommends that all Sub-Cell system components and accessories be inspected for
damage, cleaned as recommended in this manual and rinsed thoroughly with distilled water before
use. Record the following for your records:
Model
Catalog No.
Date of Delivery
Warranty Period
Serial No.
Invoice No.
Purchase Order No.