Bio-Rad Bio-Plex Pro Human Acute Phase Reagent and Diluent Kits - Manual (Page 29)

3. Select Step 2 (Select Analytes) and choose the appropriate acute
phase panel name, if available in the pull-down menu. If the panel
name is not available, create a new panel. See the Bio-Plex Manager
software instruction manual for details.
Choose the analytes to be selected from the available list of
targets. Note that the targets will already be entered in the selected
view when using a downloaded protocol. The selected panel
cannot be copied into the Available view and pull-down list with this
version of software, though it can be copied in Bio-Plex Manager
version 5.0.
4. Select Step 3 (Format Plate) and click on the Plate Formatting tab.
Click on and drag the cursor over all the wells that contain standards.
Then click on and drag the cursor over the wells that contain blanks.
Repeat to identify all the wells that contain controls and to identify all
the wells that contain samples.
25
Plate Formatting Example