Bio-Rad Bio-Scale™ Mini UNOsphere SUPrA™ Affinity Cartridges - Manual (Page 11)

Section 2
Connecting to Bio-Rad's
Low-Pressure
Chromatography
Instruments
The Bio-Scale™ Mini cartridges are ideal for use with
Bio-Rad's BioLogic™ LP system, Econo gradient
pump, and Model EP-1 Econo pump, and all low-
pressure chromatography instruments. Bio-Scale
Mini cartridges can be conveniently connected
directly to the system using the Luer lock fittings on
the cartridge.
1. Install 1.6 mm ID tubing in the pumphead.
Adjust platen pressure screw (on pumphead).
Using a screwdriver or coin, turn the screw
counterclockwise as far as it will go, then turn
clockwise three full turns. Assemble with fittings
and lock rings as shown in Figure 1.
6
10014997A:10005454A.qxd 9/23/2008 3:16 PM Page 6