BlueAnt Q1 Voice Controlled Headset - Manual (Page 26)

26
Sensitivity Level
If you find that the Q1 does not respond to your voice commands, try changing the Q1's sensitivity
level.
This setting determines how precisely the words that you say need to match the speech patterns that
the Q1 has been configured to recognize. You can change it by accessing the Q1's
"Settings Menu".
When the level is set to "High" the commands you give the Q1 will need to match the speech pattern it
is expecting more exactly, while "Low" is less restrictive and will accept your commands even if they
don't precisely match the expected speech pattern.
If you find that the Q1 is not recognizing your voice commands at all, you should change to a lower
sensitivity level.
You may wish to switch to a higher sensitivity level if the Q1 often responds to your voice commands
by carrying out the wrong command.
Changing the Sensitivity Level
1. With the Q1 switched on, but not currently on a call, click (the BlueAnt button).
2. When the Q1 asks you to "Say a Command", say the command "Settings Menu".
3. The Q1 will now read a list of options. When it finishes, say the command "Sensitivity Level".
4. The Q1 will now tell you the current setting, and ask you whether you want to set the level to
"High", "Medium" or "Low".
5. To change the setting, say either "High", "Medium" or "Low".