BlueAnt Q1 Voice Controlled Headset - Manual (Page 34)

34
Q1 Reference
This section contains detailed reference information about the Q1.
Full List of Voice Commands
Command Say This To...
"Am I Connected?" Find out if the Q1 is connected to your phone. If no phone is
connected, then the Q1 will attempt to connect to any paired
phones that are in range when you say this command.
"Answer" Answer an incoming call.
Before you can use this command, you must wait for the Q1 to
read out the phone number and ask you whether you want to
answer the call.
You won't be able to answer or reject a call with your voice if you
have turned off the
"Incoming Call Function" in the "Settings
Menu".
"Call Back" Call back the last incoming call you received on the currently
connected phone while it was connected to the Q1.
The "Call Back" function calls a number retrieved from the
Q1 headset, so it may not necessarily be the last incoming call
received on the phone (if you received a call while the phone was
disconnected from the Q1).
"Call Speed Dial 1" to "Call
Speed Dial 8" Call the corresponding speed dial stored on your phone.
For example, say "Call Speed Dial 3" to call the number stored in
speed dial 3 on your phone.
You can also set up speed dials in your Q1 headset itself. For more
information, see
"Setting Up Speed Dials" (page 23) .
"Call Information" Call your local information service.
This command will only work if your Q1 has been supplied to
you with an information service number stored in the
"Call
Information" setting on the headset.
"Cancel" Cancel the current operation.