Canon PowerShot G12 - Manual (Page 111)

111
In D mode, you can choose 3 levels of flash output.
Set the mode dial to D.
Choose the level of flash output.
● After pressing the r button, immediately
turn the ÷ dial to choose the level of
output, then press the m button.
X Once set, ~ will appear on the screen.
When the camera detects the possibility that people have their eyes shut,
appears.
Choose [Blink Detection].
● Press the n button, then choose
[Blink Detection] in the 4 tab. Press the
qr buttons to choose [On].
Shoot.
X When a person with shut eyes is detected,
a frame and
appear.
Adjusting the Flash Output
You can also set the flash output with the following methods. However, it
cannot be set with the
r button when an external flash (sold separately) is
attached. In this case, set the flash output using methods with an asterisk *.
• After pressing the m button, press the op buttons to choose ~, then press
the qr buttons or turn the Ê dial. *
• Press the n button and choose [Flash Control] from the 4 tab. Then
choose [Flash Output] and press the qr buttons.*
• Press the r button, then the n button, or press and hold the r button
for more than 1 second, and the setting screen will appear. Choose [Flash
Output], then press the
qr buttons.
Checking for Shut Eyes
COP
Y