Canon PowerShot G12 - Manual (Page 178)

Using Lenses (Sold Separately)
178
Attach the tele-converter lens.
● Turn the lens in the direction of the arrow
to attach it securely to the camera.
Adjust converter settings.
● Turn on the camera.
● Press the n button to display the 4
tab and choose [Converter], then press the
qr buttons to choose [TC-DC58D].
X If [IS Mode] is set to [Off], it is not necessary
to make converter settings.
X When you remove the converter from the
camera, return the converter setting to
[None].
• When using the built-in flash, the outer edges of images (especially the
lower right) may be darkened.
• When using the tele-converter, set the camera to maximum telephoto. At
other zoom settings, the image will appear as if its corners have been cut
off.
• Use the screen for shooting. If you use the viewfinder for shooting, a
portion of the view will be blocked by the attachments.
• 8 mode is not available.
• Completely remove all dust and dirt from conversion lenses with a lens
blower brush before use.
• If you shoot in L while using these lens attachments, the included
software cannot be used to accurately stitch the images back together.
COP
Y