Canon PowerShot G12 - Manual (Page 129)

129
You can automatically play back images recorded to a memory card.
Choose [Slideshow].
● Press the n button to choose
[Slideshow] from the 1 tab, then press the
m button.
Make the setting.
● Press the op buttons or turn the Ê dial
to choose an item, then press the qr
buttons to adjust the setting.
Choose [Start].
● Press the op buttons or turn the Ê dial to
choose [Start], then press the m button.
X The slideshow will start a few seconds after
[Loading image...] displays.
● You can pause/restart a slideshow by
pressing the
m button again.
● Press the n button to stop the
slideshow.
Viewing Slideshows
Repeat Repeats playback of images
Play Time Display time for each image
Effect
Transition effects when switching
between images
• If you press the qr buttons or turn the Ê dial during playback, the image
will switch. If you keep the qr buttons pressed, you can fast-forward
through images.
• The power saving function does not work during slideshows (p. 53).
• You cannot change [Play Time] if [Bubble] is chosen in [Effect].
• In single image playback, you can also start a slideshow by pressing and
holding the
m button and immediately pressing the button.
COP
Y