Canon PowerShot G12 - Manual (Page 87)

Changing the Tone of an Image (My Colors)
87
* When in t (p. 64), AF lock (p. 97) or manual focus modes (p. 98), will change to
.
You can change the tone of an image to sepia or black and white when
shooting.
Choose My Colors.
● After pressing the m button, press the
op buttons to choose .
Choose an option.
● Press the qr buttons or turn the Ê dial to
choose an option, then press the m
button.
X The setting will appear on the screen.
Mode
Maximum
Speed
(Approx.
images/sec.)
Description
W
Continuous 2.0
The camera shoots continuously with the focus and
exposure set when the shutter button is pressed
halfway.
Continuous
Shooting AF
0.7
The camera shoots continuously and focuses.
The [AF Frame] is set to [Center].
Continuous
Shooting LV
*
0.8
The camera shoots continuously with the focus fixed to
the position set in manual focus. In
t mode, the focus
is locked on the first shot.
• Cannot be used with the self-timer (p. 56).
• Continuous shooting speed increases in mode (p. 61).
• Depending on the shooting conditions, the camera settings, and the
zoom position, the camera may stop shooting momentarily, or the
shooting speed may slow down.
• As the number of images increases, the shooting speed may slow down.
• If the flash fires, the shooting speed may slow down.
Changing the Tone of an Image (My Colors)
COP
Y